Cx States that washer stopped on spin with error relaying to not detecting spin speed. Possible that bad actuator was installed and had bad tachometer. All checked ok after testing

"Customer reported unusual noise and excessive shaking during spin cycle. Actuator tested; it remained stuck in spin mode. Replaced agitator, recalibrated, and confirmed unit is operating properly.; used 1 W10913953 (ACTUATOR), and 1 COUPON (Military Discount) from stock"

"Customer reports dryer runs with door open and not heating. Inspected heating element and thermal fuse; both okay. Tested power under loadoutlet to dryer sparking and loose, causing heating issues. Adjusted plug, and dryer functions properly now. Recommend fixing outlet; if dryer keeps running with door open, suggest replacing board. Otherwise, unit operates as intended."

Installed new belt and all checked okay; used 3 W10721967 (DRIVE PULLEY) from stock